Bender + Wirth

Type:

led connector

led holder / cob

led holder / optic

led holder / cooling

low voltage

high volt

entertainment

Fast Fit

G9.5 derivative

G16 derivative

G22 and larger

special

bayonet

hits 1 - 9 (count 9)

catalog no.

bases

memo

ratings

969

HPL

Ceramic Lampholder for ETC spot

The welded wires of the Bender + Wirth lampholder create less heat than the usual HPL lampholder in which the wire is crimped to the contacts. The reduced heat prevents a premature lamp failure and the burn down of the contacts of the lampholder.

rated voltage:	250 V
rated current:	16 A
rated temperature:	T350
category:	II
shock protection:	unenclosed
insulation:	basic insulation

drawing

968

G9.5

Ceramic Lampholder

The unique design and material combination of the free floating contacts reduces the generation of thermal energy and is designed to accept extrem tolerances of the lamp pins.

rated voltage:	250 V
rated current:	12.5 A
rated temperature:	T350
category:	II
shock protection:	enclosed
insulation:	basic insulation

drawing

995

GX9.5

Metall Lampholder

rated voltage:	500 V
rated current:	20 A
rated temperature:	T250
category:	II
ignition voltage:	5 kV
shock protection:	unenclosed
insulation:	basic insulation

drawing

997

GY9.5
GZ9.5

Ceramice Lampholder
Standardversion with two retention springs and ejector

Variants
Version without ejector
Version with one rigid plate and without ejector

rated voltage:	500 V
rated current:	10 A
rated temperature:	T250
category:	II
ignition voltage:	4 kV
shock protection:	unenclosed
insulation:	basic insulation

drawing

999

GY9.5
GZ9.5

Ceramic Lampholder

Variants
without retention spring

rated voltage:	500 V
rated current:	10 A
rated temperature:	T350
category:	II
ignition voltage:	6 kV
shock protection:	unenclosed
insulation:	reinforced insulation

drawing

985

GY9.5
GZ9.5

Ceramic Lampholder

The patented, very robust 4-Line-Contact is designed for high wattages and an extended lamp life. The free floating configuration provides excellent tolerance compensation.

Variants
with one rigid plate.

rated voltage:	500 V
rated current:	20 A
rated temperature:	T350
category:	II
ignition voltage:	5 kV
shock protection:	unenclosed
insulation:	basic insulation

drawing

931

GZX9.5

Ceramic Lampholder for 125 watt lamps

This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.

rated voltage:	500 V
rated current:	10 A
rated temperature:	T250
category:	III
ignition voltage:	max. 25 kV
shock protection:	enclosed
insulation:	reinforced insulation

drawing

998

GZY9.5

Ceramic Lampholder for 200 watt lamps

This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.

rated voltage:	500 V
rated current:	10 A
rated temperature:	T250
category:	III
ignition voltage:	max. 25 kV
shock protection:	enclosed
insulation:	reinforced insulation

drawing

930

GZZ9.5

Ceramic Lampholder for 400 watt lamps

This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.

rated voltage:	500 V
rated current:	10 A
rated temperature:	T250
category:	III
ignition voltage:	max. 25 kV
shock protection:	enclosed
insulation:	reinforced insulation

hits 1 - 9 (count 9)