Bender + Wirth
Bender & Wirth
deutsch english


catalog no.

bases

memo

ratings

   

827

PGJX36 Ceramic Lampholder

The PGJX36 base is the newest version of the Philips FastFit line. The concerted design effort of lamp and socket created an unique system with incredible accuracy. The high tolerances of the ceramic cap and the ceramic body of the lampholder do not affect the mechanical precision of the system.

new: rated current 22 A
rated voltage: 250 V
rated current: 22 A
rated temperature: T350
category: II
ignition voltage: 5 kV / 10 kV
shock protection: enclosed
insulation: reinforced insulation

   

829

PGJX28 Ceramic Lampholder

Philips and Bender + Wirth developed the FastFit System to allow an easy and fast lamp replacement from the back side of the spotlight.

new: rated current 22 A
rated voltage: 250 V
rated current: 22 A
rated temperature: T350
category: II
ignition voltage: 5 kV / 10 kV
shock protection: enclosed
insulation: reinforced insulation

   

839

PGJ50
PGJX50
Ceramic Lampholder

For Fast Fit lamps

Variants
Version with welded wire available.
An optional centring ring on the back side of the lampholder prevents misalignment of the lamp during transportation of the spot light.

new: rated current 30 A
rated voltage: 250 V
rated current: 30 A
rated temperature: T350
ignition voltage: 5 kV / 10 kV
shock protection: enclosed
insulation: reinforced insulation

   

969

HPL Ceramic Lampholder for ETC spot

The welded wires of the Bender + Wirth lampholder create less heat than the usual HPL lampholder in which the wire is crimped to the contacts. The reduced heat prevents a premature lamp failure and the burn down of the contacts of the lampholder.
rated voltage: 250 V
rated current: 16 A
rated temperature: T350
category: II
shock protection: unenclosed
insulation: basic insulation

   

968

G9.5 Ceramic Lampholder

The unique design and material combination of the free floating contacts reduces the generation of thermal energy and is designed to accept extrem tolerances of the lamp pins.
rated voltage: 250 V
rated current: 12.5 A
rated temperature: T350
category: II
shock protection: enclosed
insulation: basic insulation

   

837

G9.5 Aluminumlampholder with heat sink

This lampholder has been developed for extreme temperature conditions. Its specially designed aluminium housing, high performance contacts and leads enable reliable operation at continuous temperatures up to 350°C.

Will be replaced by 968
rated voltage: 250 V
rated current: 16 A
rated temperature: T350
shock protection: enclosed
insulation: basic insulation

   

995

GX9.5 Metall Lampholder

rated voltage: 500 V
rated current: 20 A
rated temperature: T250
category: II
ignition voltage: 5 kV
shock protection: unenclosed
insulation: basic insulation

   

996

GY16 Metall Lampholder

rated voltage: 500 V
rated current: 20 A
rated temperature: T250
category: II
ignition voltage: 5 kV
shock protection: unenclosed
insulation: basic insulation

   

997

GY9.5
GZ9.5
Ceramice Lampholder
Standardversion with two retention springs and ejector

Variants
Version without ejector
Version with one rigid plate and without ejector
rated voltage: 500 V
rated current: 10 A
rated temperature: T250
category: II
ignition voltage: 4 kV
shock protection: unenclosed
insulation: basic insulation

   

999

GY9.5
GZ9.5
Ceramic Lampholder

Variants
without retention spring
rated voltage: 500 V
rated current: 10 A
rated temperature: T350
category: II
ignition voltage: 6 kV
shock protection: unenclosed
insulation: reinforced insulation

NEWS CATALOGUE COMPANY CONTACT DISCLAIMER IMPRINT PRIVACY STATEMENT