Bender + Wirth

catalog no.

bases

memo

ratings

827

Ceramic Lampholder

The PGJX36 base is the newest version of the Philips FastFit line. The concerted design effort of lamp and socket created an unique system with incredible accuracy. The high tolerances of the ceramic cap and the ceramic body of the lampholder do not affect the mechanical precision of the system.

new: rated current 22 A

rated voltage:	250 V
rated current:	22 A
rated temperature:	T350
category:	II
ignition voltage:	5 kV / 10 kV
shock protection:	enclosed
insulation:	reinforced insulation

drawing

829

PGJX28

Ceramic Lampholder

Philips and Bender + Wirth developed the FastFit System to allow an easy and fast lamp replacement from the back side of the spotlight.

new: rated current 22 A

rated voltage:	250 V
rated current:	22 A
rated temperature:	T350
category:	II
ignition voltage:	5 kV / 10 kV
shock protection:	enclosed
insulation:	reinforced insulation

drawing

839

PGJ50
PGJX50

Ceramic Lampholder

For Fast Fit lamps

Variants
Version with welded wire available.
An optional centring ring on the back side of the lampholder prevents misalignment of the lamp during transportation of the spot light.

new: rated current 30 A

rated voltage:	250 V
rated current:	30 A
rated temperature:	T350
ignition voltage:	5 kV / 10 kV
shock protection:	enclosed
insulation:	reinforced insulation

drawing

969

HPL

Ceramic Lampholder for ETC spot

The welded wires of the Bender + Wirth lampholder create less heat than the usual HPL lampholder in which the wire is crimped to the contacts. The reduced heat prevents a premature lamp failure and the burn down of the contacts of the lampholder.

rated voltage:	250 V
rated current:	16 A
rated temperature:	T350
category:	II
shock protection:	unenclosed
insulation:	basic insulation

drawing

968

G9.5

Ceramic Lampholder

The unique design and material combination of the free floating contacts reduces the generation of thermal energy and is designed to accept extrem tolerances of the lamp pins.

rated voltage:	250 V
rated current:	12.5 A
rated temperature:	T350
category:	II
shock protection:	enclosed
insulation:	basic insulation

drawing

995

GX9.5

Metall Lampholder

rated voltage:	500 V
rated current:	20 A
rated temperature:	T250
category:	II
ignition voltage:	5 kV
shock protection:	unenclosed
insulation:	basic insulation

drawing

996

GY16

Metall Lampholder

rated voltage:	500 V
rated current:	20 A
rated temperature:	T250
category:	II
ignition voltage:	5 kV
shock protection:	unenclosed
insulation:	basic insulation

drawing

997

GY9.5
GZ9.5

Ceramice Lampholder
Standardversion with two retention springs and ejector

Variants
Version without ejector
Version with one rigid plate and without ejector

rated voltage:	500 V
rated current:	10 A
rated temperature:	T250
category:	II
ignition voltage:	4 kV
shock protection:	unenclosed
insulation:	basic insulation

drawing

999

GY9.5
GZ9.5

Ceramic Lampholder

Variants
without retention spring

rated voltage:	500 V
rated current:	10 A
rated temperature:	T350
category:	II
ignition voltage:	6 kV
shock protection:	unenclosed
insulation:	reinforced insulation

drawing

985

GY9.5
GZ9.5

Ceramic Lampholder

The patented, very robust 4-Line-Contact is designed for high wattages and an extended lamp life. The free floating configuration provides excellent tolerance compensation.

Variants
with one rigid plate.

rated voltage:	500 V
rated current:	20 A
rated temperature:	T350
category:	II
ignition voltage:	5 kV
shock protection:	unenclosed
insulation:	basic insulation

drawing