Bender + Wirth

Type:

led connector

led holder / cob

led holder / optic

led holder / cooling

low voltage

high volt

entertainment

bayonet

hits 1 - 7 (count 7)

catalog no.

bases

memo

ratings

420

LED

420 LED Wire-to-Board-Feeder

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

The feeder 420 have a welded connection between wire and connector which creates a very robust and low resistance connection.

The top-side assembly improves the module temperature management and simplifies maintenance operations.

rated voltage:	50VAC / 120VDC
rated current:	5 A (20°C)
rated temperature:	-50°C / +100 C

drawing

421

LED

421 LED Board-to-Board-Connector

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

Due to the small dimensions, the connectors 421 maintain the catch between the LED´s even with small distances.

The top-side assembly improves the module temperature management and simplifies maintenance operations.

rated voltage:	50VAC / 120VDC
rated current:	5 A (20°C)
rated temperature:	-50°C / +100 C

drawing

423

LED

423 SMD-Pins

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

The short SMD Pins 423 are packed in a blister and spooled on a reel. Therefore, they are suitable for automated SMD installation.

drawing

424

LED

424 HV-Wire-to-Board-Feeder

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

The feeder 424 have a welded connection between wire and connector which creates a very robust and low resistance connection.

A special designed sleeve protects the sensitive connection area of the feeder 424.

The top-side assembly improves the module temperature management and simplifies maintenance operations.

rated voltage:	250VAC / 450VDC
rated current:	5 A (20°C)
rated temperature:	-50°C / +100 C

drawing

425

LED

425 HV-Board-to-Board-Connector

The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible.

Due to the small dimensions, the connectors 425 maintain the catch between the LED´s even with small distances.

The high voltage version 425 allows a safe connection up to 250V AC / 450V DC (with transient overvoltages up to 4kV).

The top-side assembly improves the module temperature management and simplifies maintenance operations.

rated voltage:	250VAC / 450VDC
rated current:	5 A (20°C)
rated temperature:	-50°C / +100°C

drawing

410

R13

Plastic lampholder

This lampholder was designed for the Philips OLED modules. The feeder is installed at the ends of each OLED series.

rated voltage:	32 V DC
rated current:	1 A
rated temperature:	T100
category:	II
shock protection:	unenclosed

drawing

411

R13

Plastic Lampholder

This lampholder was designed for the Philips OLED modules. The coupler is installed between the OLEDs of a series.

rated voltage:	32 V DC
rated current:	1 A
rated temperature:	T100
category:	II
shock protection:	unenclosed
insulation:	basic insulation

hits 1 - 7 (count 7)